Bathroom

Any bathroom accessory - wherever you need it - no drilling!

3S magnet installation options

Backsplash

Wall clading behind the sink

If you’re looking for a minimalistic, easy to clean bathroom backsplash, look no further. 3S magnet panels are a simple, grout free surface that protects the wall above your sink – in addition you get all the storage space you need for bathroom shelves and other accessories – without drilling!

Shower shelves

The 3S magnet system is perfect for showers—easy to install, with strong shelves that can be removed for cleaning. Once the wall panel is in place, simply add as many shelves or hooks as you need.

No need to drill or loose precious time cleaning the shelves, hunched over the bathtub.

Toilet accessories

Our minimalist toilet accessories can be easily glued to your wall or tiles, keeping them off the ground for easy cleaning. Explore our collection of toilet paper holders, brush holders, racks, and shelves, available individually or as bathroom sets.

Towel hooks

Add towel hooks exactly where you need them—without drilling or damage. Our strong magnetic towel hooks grip securely to any 3S panel, and can be moved, added, or removed in seconds.

Bathroom Accessories

Explore our collection of magnetic accessories for every room and use. Browse through our kitchen accessories, bathroom accessories, shelves, hooks, planters and much more!

Wall panels in the bathroom

Our waterproof, heat-resistant panels are custom-cut and can be installed instead of tiles behind sinks, in showers, or next to toilets. Their smooth surface is easy to clean and adds a sleek, minimal look to any space.

The magnetic storage system lets you attach shelves, hooks, toilet paper or brush holders without drilling – simply glue the base and snap accessories into place.

Perfect for new bathrooms or quick upgrades, the system keeps your essentials off the floor and within easy reach. You can easily move or replace items anytime, keeping your space organized and hygienic.

Materials

Our wall panels are made from high quality steel, powder coated with specially durable powder coating.

The panels are water proof, heat resistant and UV resistant. You can install them behind induction or gas stoves. 

 

THICKNESS: 5mm (including glue)

We offer three standard colors. We also keep stock of all accessories in these three standard colors.

STANDARD COLORS:

White - RAL 9016

Graphite - black with metallic effect

Black - RAL 9005

We also offer other colors, but they are only available with custom orders and they usually come with a longer production time and some optional expenses.

OTHER COLORS IN OUR COLLECTION:

Cremé - RAL 9001

Grey white - RAL 9002

Silver - RAL 9006

Pure white - RAL 9010

Anthracite - RAL 7016

Brown grey - RAL 8019

If you are interested in a color that is not part of our collection, please contact us and we will provide you with an offer for a custom color.

The color images shown are photos of actual 3S panels and are for informational purposes only. A sample set for in-person viewing can be ordered via our email.

Size

The maximum size of one panel is 2700 x 700 mm or 2000 x 1200 mm.

If your wall is bigger, we produce the wall covering from two or more panels.

Maximum panel size - OPTION 1

Maximum panel size - OPTION 2

If there is a need for a larger cladding, two or more panels are joined together. The connecting edges are treated by hand, so the connection is very thin and almost invisible.

Examples of connection in the wall panel.

Measurments

SLOVENIA

In Slovenia we offer services of taking the measurements and installation. Include your postcode in the custom panel form and we will include them in the offer. 

Of course, you can take the measurements by yourself. Once the order is confrimed we will send you extensive instructions for taking measurements. We are also available for any questions that you might have.

GET AN OFFER
OTHER COUNTRIES

Once the order is confrimed we will send you extensive instructions for taking measurements. We are also available for any questions that you might have.

You can also send us your architect's or contractor's contact information and we will send them extensive instructions and offer any additional support. 

Installation

In Slovenia we offer the service of installing the panels.

OTHER COUNTRIES:

Once the order is confirmed (or when the panel is shipped) we will provide extensive installation instructions and any recommendations we have for your specific situation.

There are multiple different ways to install our panels. 

3S magnet as a kitchen backsplash:

The installation in the kitchen is similar to glass backsplashes – the panels have to be pre-cut and are glued to the wall. During the production of the panels, any cutouts for electrical outlets or other obstructions need to be done by our workshop. If you cut the panel on site you void the guarantee.

The bottom edge of the panel is sealed from the back, so there is no need for any additional silicone or slats.

3S magnet wall panels in bathrooms, bedrooms, kids rooms and anywhere else:

For panels in other spaces we recommend using one of these two methods of attachment (depending on the size of the panel and the quality of the surface it will be attached to: GLUEING or ANCHORING.

GLUEING

Is used when you want to install a 3S magnet wall panel on a hard surface (tiles, wood, stone) or when the panel “sits” on a surface (worktop, floor, etc.).

The panels are glued with a combination of double-sided tape (included with the panel) and soft mounting adhesive.

ANCHORING

Is used when you want to install a 3S magnet wall panel in the middle of a wall.

The panels that have been prepared for this type of installation have small screws (anchors) welded on the back. All you have to do is drill small holes in the wall (6mm in size and 2,5cm in depth) and glue the anchors in the holes. This way we make sure that the whole wall carries the weight of the panel, not just the final layer, that is sometimes very fragile (paint, wallpaper...)

SCREWS

On request, we also offer mounting with screws. In this situation, we provide screws that are the same color as the panel. However, the screws will still be (somewhat) visible.

We prefer anchoring installation option, because it has no visible mounting details.

Cleaning

Cleaning 3S magnet splashbacks and accessories is very simple and, since the panels are not sensitive to finger prints, you don’t have to do it often.

Before cleaning, empty the magnetic accessories and then remove them from the 3S magnet panel. For best results with grease stains, use hot water with dish detergent and a soft cloth (or a sponge). Afterwards, to get a perfect result, you can clean the surface with glass cleaner and a microfiber cloth.

It is recommended that any solid oak wood elements only be cleaned with a dry or damp cloth. However, if you feel there is a need, you can oil them with a natural transparent oil (approximately once a year).

Production time

We keep stock of standard panels and accessories in our standard three colors (black, white and graphite). Products that are in stock take 3-7 workdays to ship.

Lead-time for custom panels is usually 4-6 weeks, but please check the offer we sent you for exact timeline.

Order Quote for Custom Panel








    In order to make an offer, we need dimensions of your wall and number of cutouts for electrical sockets. If your wall has 1 double socket and 1 tripple socket, that counts as 2 cutouts (the size of the cutout is not relevant).

    Standard size panels

    Inspiration for your bathroom:

    FAQ

    Can I glue the 3S magnet wall panel directly onto tiles?
    Absolutely! If you’ve purchased a standard wall panel, everything you need is included in the package. Simply apply the provided adhesive as instructed and press the panel firmly onto the tiled surface.
    Can I glue the panel directly onto a painted wall?
    Yes, but we recommend using the anchoring method. This involves drilling two small holes into the wall to securely anchor the panel and prevent it from coming loose over time.
    Are 3S magnet accessories permanently magnetic?
    Yes! All magnetic accessories have built-in neodymium magnets, which are permanent and will never lose their strength over time.
    What is the maximum weight a magnetic accessory can hold?
    Each accessory has its own load capacity, tailored to its intended use. We carefully balance magnet strength to ensure every product is strong enough to hold what it’s designed for—without making it difficult to move or handle. You can find the guaranteed load capacity (when used with original 3S design wall panels) in our catalog or on the product page in our online shop.

    CONTACT US